A favorite with Sailboat owners, this light weight, low profile, stainless steel antenna was specially designed for masthead mounting.

• Hermetically sealed, tin-plated copper wire coil
• Stainless steel body and whip
• SO-239 connector
• Stainless steel L-shaped bracket supplied for mounting
• One section

A favorite with Sailboat owners, this light weight, low profile, stainless steel antenna was specially designed for masthead mounting. The 5215-C-X comes with 60ft of RG-8/X low-loss cable and PL-259 connectors

• Hermetically sealed, tin-plated copper wire coil
• Stainless steel body and whip
• SO-239 connector
• Stainless steel L-shaped bracket supplied for mounting
• 60ft RG-8/X cable included, with connectors
• One section

The perfect choice for bass boats, center console fishing boats, or any vessel where compact size is most important. Comes with a heavy-duty stainless steel whip for extra stability at high speeds. Chrome plated brass canister minimizes de-tuning.

• Sealed, tin-plated copper wire coil
• Stainless steel whip (36in)
• Requires a mount with a center hole for passage of the supplied cable.
• 15ft RG-58 cable and a PL-259 connector included.
• Suggested mount: Shakespeare Styles 4187, 4188-S, or 4190 Ratchet Mounts (each sold separately)
• Whip is user replaceable.
• One section

• Easy to install
• Adjustable & secure
• Fits most handled vehicles

Conveniently mount your eXplorist^TM XL GPS receiver on your bicycle, snowmobile, or motorcycle.

This easy-to-install mounting bracket securely holds your receiver for optimal viewing while on the trails, back roads, city streets and every adventure.

• Sturdy & secure
• Adjustable
• Simple installation

Conveniently mount your eXplorist^TM XL GPS receiver in your car, truck, boat or any vehicle. This easy-to-install mounting bracket securely holds your receiver for optimal viewing while on-road, off-road, or on the water; wherever your adventure takes you.

• High-speed USB
• Easy data transfer
• Power from your PC

Easily download maps and other data from your PC to the internal memory or SD card of your eXplorist^TM XL. Log tracks on your GPS and save them to optional MapSend^® software for future explorations. Plug in this high-speed USB cable for fast transfer.

• Sturdy & secure
• Full tilt & swivel
• Easily transfer between vehicles

Easily download maps and other data from your PC to the internal memory or SD card of your eXplorist^TM XL. Log tracks on your GPS and save them to optional MapSend^® software for future explorations. Plug in this high-speed USB cable for fast transfer.

• 12” full VGA 800x600 high resolution display
• Supplied with external 50 channel WAAS GPS antenna
• C-MAP NT+ and C-MAP MAX compatible
• Radar / Fish Finder and AIS capable
• Able to show Distress and Position report calls received from a DSC VHF radio
• 2 NTSC or PAL video inputs with Picture In Picture
• VGA video output connects to an external monitor or compatible TV
• Alpha numeric keypad, and 6 programmable soft keys
• Customizable data windows
• Able to show Distress and Position report calls received from a DSC VHF radio
• GPS Status, Chart, Navigation, Highway, Celestial, Tides, Chart/Fish, Optional Fish finder, Radar and AIS pages
• 3000 Marks / 50 Routes
• 20 Tracks with 10000 available track points
• C-MAP NT+ and C-MAP MAX compatible
• Dedicated MARK, ROUTE and INFO keys
• Dual chart window with independent zoom levels
• Satellite images on base map
• Font size selection on chart page
• Navigation and Route line thickness
• Navigate to an Olympic route
• Navigate a route in simulation
• Find Key, allows quick access to Port information, tide stations, wrecks, Point Of Interest and coordinates
• Automatic switching of Daylight savings time
• Route checking
• Supplied mounting bracket and flush mounti

  Radar Option now available Sitex compatible radar models: MDS-1, MDS-8, MDS-9, MDS-10-4, MDS-10-5 For additional information click on the Owners Manual tab, select Radar and download the owner and installation manuals. TFT 256 Color 12-Inch Display (Screen Resolution: 800 x 600) There is no question about it. With a big, bold display there is no mistaking the information. It can easily be seen in locations where the Chart Plotter cannot be mounted directly in front of you. 3000/Routes: 50 (Max 50 waypoints each) Beauty and brains! Not only does the CP500 boast a beautiful display, it can also be loaded with enough Waypoints and Marks to guarantee you will always arrive at you destination. C-Map NT+ or MAX Compatible C-MAP is the best cartography available. The CP500 comes pre-loaded with cartography to 2NM scale. If you require greater detail, C-MAP offers many different chart configurations to suit your needs. the CP500 has 2 C-Map Cartography slots for larger coverage areas. 2 Video Input and 1 VGA monitor Output The CP500 has 2 connection that allows a video signal from a optional camera or DVD to be connected and shown on the whole display, or a Picture in Picture window. The CP500 also has a VGA video output which allows the plotters display to be repeated on compatible Monitors and TV's at a second station. Optional FF525 Black Box Fish Finder The optional FF525 Fish Finder option brings high-end fish finding capability to Standard Horizon's CP500 WAAS GPS Chart plotter making it an ideal choice for casual or professional angler's alike. The FF525 Dual Frequency (50 and 200kHz) Black Box Fish Finder's advanced filtering eliminates unwanted noise and sharpens return echos for enhanced seperation and detection. Transducer ID™ allows the FF525 to query the transducer (sold separately) to determine its perfromance characteristics. Power output, frequency, beam pattern and other unique transducer characteristics are sent to the fish finder. this data allows the fish finder to fine tune itself to match the transducer which optimizes overall system performance. No matter what the conditions, you will be able to fine tune your fishing rather than the fish finder. Note: Transducer ID™ is a registered trademark of AIRMAR Technology Corporation, Milford. AIS Targets Large vessels routinely transmit their navigation information. The CP500 is capable of displaying these signals (when optional AIS receiver connected) as Targets on the chart page in relation to your position. In addition the CP500 can be setup to alarm when a target ship is within a specific time or range zone, to alert you to avoid a collision. Additional features NorthUp and CourseUp display setting Supports Loran TD's Dedicated GOTO, MARK and ROUTE keys Split Screen Fish Finder and Radar when optional FF520 or 2K or 4K Antennas connected Supplied with Mounting Bracket and Hardware, Flushmount hardware and 16ch WAAS GPS antenna with 30Ft of cable 2 Year Warranty The CP500 was designed from the ground up to take the punishment of the marine environment and is "BACKED BY A 2 YEAR WATERPROOF WARRANTY!"

Model
Color Video Camera & cables
ACVC10	DVD or VCR Adaptor Cable
VGAC10	VIDEO OUTPUT CABLE
Depth Transducers & Hardware
DST520	500W 2" Nylon Thru-hull Depth/Temp Transducer
DST521	500W Transom Mount Depth/Speed/Temp transducer
DST523	500W 2" Bronze Thru-hull Depth/Temp Transducer
DST525	500W In-Hull depth transducer
DST526	500W Thru-hull Depth/Speed/Temp Transducer
DST527	1000W In-hull Depth Transducer
DST528	1000W Thru-hull Depth/Temp With Fairing Block
FF525 Black Box Fishfinder	FF525 Black Box Fishfinder

• 5” Color TFT daylight viewable LCD display
• Internal 50 channel WAAS GPS
• Connection for optional 50 channel WAAS GPS antenna
• Radar and AIS capable
• 3000 Marks / 50 Routes
• 20 Tracks with 10000 available track points
• Dual chart window with independent zoom levels
• Satellite images on base map
• Navigate to an Olympic route
• Route checking
• Dedicated MARK, ROUTE and FIND Keys
• Supplied with a swivel mounting bracket and flush mounting hardware
• 1 NMEA inputs / 2 outputs
• 3 Year Waterproof Warranty

• Built-in 600W Dual frequency Fish finder
• 50 & 200kHz dual frequency selection
• 2x and 4x Zoom
• Bottom Lock andWhite Line selections
• Sensitivity Time Control (STC) control and Surface Noise Filter
• Speed Sensor (if available on transducer)
• Alarms - Shallow, Depth, Temp Upper and Lower

600W internal dual frequency fish finder The internal dual frequency (50 and 200kHz) Fish Finder's advanced filtering eliminates unwanted noise and sharpens return echos for enhanced seperation and detection. Transducer ID™ allows the CPF180i to query the transducer (sold separately) to determine its perfromance characteristics. Frequency, beam pattern and other unique transducer characteristics are sent to the Internal fish finder. This data allows the fish finder to fine tune itself to match the transducer which optimizes overall system performance. No matter what the conditions, you will be able to fine tune your fishing rather than the fish finder. Note: Transducer ID™ is a registered trademark of AIRMAR Technology Corporation, Milford. Internal GPS antenna / External Option The CPF180i has a 50 Channel GPS and antenna integrated into the rear case making it perfect for dash mount installations. For flush mounting the CPF180i has an dedicated connections for an optional GPS antenna supplied with 30 feet of routing cable. Radar and AIS options Radar: The CPF180i is compatible to Sitex radar models; MDS-1 (2KW Dome), MDS-8 (2KW Dome), MDS-9 (4K Dome), MDS-10-4 (Open array), MDS-10-5 (Open array). Automatic Identification System: Connnecting an option AIS ) receiver to the CPF180i to show targets from Commercial ships required to transmit their location on the chart page. Move the cursor over a target to display target information including, SOG, COG, Closest Point of Approach, and Time to Closest Point of Approach. Direct Sunlight viewable color display Nothing beats the detail and impact of a color display. Featuring cutting edge transflective screen technology, the result is a display that delivers un-compromised bright, vivid color chart detail in the toughest of applications--direct sunlight. Dedicated Navigation Keys Using a GPS Chart Plotter has never been so easy! The CPF180i has dedicated MARK and ROUTE keys that allows the creation of a single waypoint or creation of a route right on the Chart Page. Want to navigate to one of the marks or to a Route, the GOTO key allows you to do so directly on the chart or via the popup menu when the key is pressed. VHF Digital Selective Calling and Position Polling The CPF180i GPS Chart Plotter has the capability to be connected to STANDARD HORIZON VHF Fixed mounted radios with DSC polling capability. This is done by simply connecting 3 wires between the CPF180i and the VHF. Connecting the products together allow you to securely and totally privately poll and display another vessels position on the display of the CPF180i. To take this one step further, the CPF180i has a DSC Call directory that logs the position of the polled vessels and also the position of a vessel that has transmitted a DSC Distress call. STANDARD HORIZON pioneered this function, leading the industry with innovative features and functionality. Swivel bracket and Flush Mount Kit Supplied with a swivel mount bracket allowing the CPF180i to be rotated 360 degrees (left or right) for optimal viewing. In addition, flush mounting hardware is included, no optional flush mount kit needed! 2 Year Warranty The CPF180i was designed from the ground up to take the punishment of the marine environment and is "BACKED BY A 2 YEAR WATERPROOF WARRANTY!"

Model
Depth Transducers & Hardware
DST520	500W 2" Nylon Thru-hull Depth/Temp Transducer
DST521	500W Transom Mount Depth/Speed/Temp transducer
DST523	500W 2" Bronze Thru-hull Depth/Temp Transducer
DST525	500W In-Hull depth transducer
DST526	500W Thru-hull Depth/Speed/Temp Transducer

• 7” Color TFT daylight viewable LCD display
• Internal 50 channel WAAS GPS
• Connection for optional 50 channel WAAS GPS antenna
• Radar and AIS capable
• 3000 Marks / 50 Routes
• 20 Tracks with 10000 available track points
• Dual chart window with independent zoom levels
• Satellite images on base map
• Navigate to an Olympic route
• Route checking
• Dedicated MARK, ROUTE and FIND Keys
• Supplied with a swivel mounting bracket and flush mounting hardware
• 1 NMEA inputs / 2 outputs
• 3 Year Waterproof Warranty

• Built-in 600W Dual frequency Fish finder
• 50 & 200kHz dual frequency selection
• 2x and 4x Zoom
• Bottom Lock andWhite Line selections
• Sensitivity Time Control (STC) control and Surface Noise Filter
• Speed Sensor (if available on transducer)
• Alarms - Shallow, Depth, Temp Upper and Lower

600W internal dual frequency fish finder The internal dual frequency (50 and 200kHz) Fish Finder's advanced filtering eliminates unwanted noise and sharpens return echos for enhanced seperation and detection. Transducer ID™ allows the CPF300i to query the transducer (sold separately) to determine its perfromance characteristics. Frequency, beam pattern and other unique transducer characteristics are sent to the Internal fish finder. This data allows the fish finder to fine tune itself to match the transducer which optimizes overall system performance. No matter what the conditions, you will be able to fine tune your fishing rather than the fish finder. Note: Transducer ID™ is a registered trademark of AIRMAR Technology Corporation, Milford. Internal GPS antenna / External Option The CPF300i has a 50 Channel GPS and antenna integrated into the rear case making it perfect for dash mount installations. For flush mounting the CPF180i has an dedicated connections for an optional GPS antenna supplied with 30 feet of routing cable. Radar and AIS options Radar: The CPF300i is compatible to Sitex radar models; MDS-1 (2KW Dome), MDS-8 (2KW Dome), MDS-9 (4K Dome), MDS-10-4 (Open array), MDS-10-5 (Open array). Automatic Identification System: Connnecting an option AIS ) receiver to the CPF300i to show targets from Commercial ships required to transmit their location on the chart page. Move the cursor over a target to display target information including, SOG, COG, Closest Point of Approach, and Time to Closest Point of Approach. Direct Sunlight viewable color display Nothing beats the detail and impact of a color display. Featuring cutting edge transflective screen technology, the result is a display that delivers un-compromised bright, vivid color chart detail in the toughest of applications--direct sunlight. Dedicated Navigation Keys Using a GPS Chart Plotter has never been so easy! The CPF300i has dedicated MARK and ROUTE keys that allows the creation of a single waypoint or creation of a route right on the Chart Page. Want to navigate to one of the marks or to a Route, the GOTO key allows you to do so directly on the chart or via the popup menu when the key is pressed. VHF Digital Selective Calling and Position Polling The CPF300i GPS Chart Plotter has the capability to be connected to STANDARD HORIZON VHF Fixed mounted radios with DSC polling capability. This is done by simply connecting 3 wires between the CPF300i and the VHF. Connecting the products together allow you to securely and totally privately poll and display another vessels position on the display of the CPF300i. To take this one step further, the CPF300i has a DSC Call directory that logs the position of the polled vessels and also the position of a vessel that has transmitted a DSC Distress call. STANDARD HORIZON pioneered this function, leading the industry with innovative features and functionality. Swivel bracket and Flush Mount Kit Supplied with a swivel mount bracket allowing the CPF300i to be rotated 360 degrees (left or right) for optimal viewing. In addition, flush mounting hardware is included, no optional flush mount kit needed! 2 Year Warranty The CPF300i was designed from the ground up to take the punishment of the marine environment and is "BACKED BY A 2 YEAR WATERPROOF WARRANTY!"

Model
Depth Transducers & Hardware
DST520	500W 2" Nylon Thru-hull Depth/Temp Transducer
DST521	500W Transom Mount Depth/Speed/Temp transducer
DST523	500W 2" Bronze Thru-hull Depth/Temp Transducer
DST525	500W In-Hull depth transducer
DST526	500W Thru-hull Depth/Speed/Temp Transducer

Ideal Marine VHF for mariners who already have an AIS onboard.

25W Marine fixed mount VHF with AIS receiver or transponder input, Waypoint navigation and 30W loud hailer. RAM3 second station compatible.

• AIS (Automatic Identification System) receiver or transponder must be connected to perform AIS functions
• AIS target display*: MMSI, Call Sign, Ship Name, BRG, DST, SOG and COG
• Contact AIS Ship with DSC*
• CPA (Closest Point of Approach) Alarm*
• 80dB Commercial grade receiver
• Class D DSC (Digital Selective Calling) with Individual, All ship, Position Report, Request and Distress
• Independent Channel 70 receiver built-in for continuous DSC watch
• Local/Distance attenuator
• Enter, Save and Navigate to waypoints with Compass page**
• Navigate to a DSC Distress Call**
• Submersible JIS-7 / IPX7 (3.3 feet for 30 minutes)
• ClearVoice noise canceling speaker microphone with channel selection and 16/9 key
• Oversized rotary channel knob with push to enter, backlit display and keys
• 30 Watt PA/Loud Hailer with preprogrammed fog signals
• Capable of connecting an optional RAM3 second station remote microphone
• Intercom between radio and RAM3
• DSC position request and report functions when connected to compatible GPS chart plotter
• Voice Scrambler (optional)
• Versatile user-programmable scanning, priority scan and Dual Watch
• One-button access to Channel 16 and 9
• User programmable soft keys
• Navigation (LAT/LON, SOG and COG) information shown on display when connected to GPS
• 38400 AIS VDM sentence output to compatible GPS chart plotter
• 3 Year Waterproof Warranty
*when connected to an optional AIS receiver or transponder
**when connected to an optional GPS

Ideal Marine VHF for mariners who already have an AIS onboard.

25W Marine fixed mount VHF with AIS receiver or transponder input, Waypoint navigation and 30W loud hailer. RAM3 second station compatible.

• AIS (Automatic Identification System) receiver or transponder must be connected to perform AIS functions
• AIS target display*: MMSI, Call Sign, Ship Name, BRG, DST, SOG and COG
• Contact AIS Ship with DSC*
• CPA (Closest Point of Approach) Alarm*
• 80dB Commercial grade receiver
• Class D DSC (Digital Selective Calling) with Individual, All ship, Position Report, Request and Distress
• Independent Channel 70 receiver built-in for continuous DSC watch
• Local/Distance attenuator
• Enter, Save and Navigate to waypoints with Compass page**
• Navigate to a DSC Distress Call**
• Submersible JIS-7 / IPX7 (3.3 feet for 30 minutes)
• ClearVoice noise canceling speaker microphone with channel selection and 16/9 key
• Oversized rotary channel knob with push to enter, backlit display and keys
• 30 Watt PA/Loud Hailer with preprogrammed fog signals
• Capable of connecting an optional RAM3 second station remote microphone
• Intercom between radio and RAM3
• DSC position request and report functions when connected to compatible GPS chart plotter
• Voice Scrambler (optional)
• Versatile user-programmable scanning, priority scan and Dual Watch
• One-button access to Channel 16 and 9
• User programmable soft keys
• Navigation (LAT/LON, SOG and COG) information shown on display when connected to GPS
• 38400 AIS VDM sentence output to compatible GPS chart plotter
• 3 Year Waterproof Warranty
*when connected to an optional AIS receiver or transponder
**when connected to an optional GPS

Frequency Range Marine Band: 156 MHz - 163.275 MHz, channel steps 25kHz
Frequency Range PMR Band: 137MHz - 174 MHz, channel steps 12.5/25kHz
Frequency Stability: ±2.5 ppm (-30 to +60?C)
Emission Type: 16K003E, 16K0F3E, 11K0F3E
Antenna Impedance: 50 Ohms
Supply Voltage: 7.2VDC
Current Consumption: 200 mA (Receive), 40 mA (Standby), TX: 1.4 A (5W) / 0.9 A (2.5W) / 0.5 A (1W)
Operating Temperature: -30 to +60?C
Waterproof rating: 30 minutes @ 1M depth (JIS 7)
Case Size 58W x 120H x 30.5D mm
Weight (Approx.): 380g with FNB-83

Transmitter
RF Output Power: 5W/ 25W /1W @72V
Modulation Type: Vanable Reactance
Maximum Deviation (Wide) : ±5 kHz
Maximum Deviation (Narrow) : ±2.5 kHz
Spurious Emission: At least 73 dB below
Microphone Impedance: 2k Ohm
Receiver Circuit Type: Double-Conversion Superheterodyne
lntermediate Frequencies: 1st 21.7 MHz, 2nd 450 kHz
Sensitivity: 0.25 uV 12 dB SINAD
Adjacent Channel Selectivity: 70 dB
lntermodulation response: 70 dB
Selectivity (Wide): 12 kHz/25kHz(-6dB/-60dB)
Selectivity (Narrow): 6 kHz/18kHz(-6dB/-60dB)
AF Output: 600 mW @ 16 Ohm for 10% THD (@7.2V)

General Frequency Ranges: TX: 144 - 146 or 144 - 148 MHz RX: 144 - 146 or 137 - 174 MHz Channel Step: 5/10/12.5/15/20/25/50/100 kHz Standard Repeater Shift: ±600 kHz Frequency Stability: Better than ±10 ppm [-4æF to 140æF (-20æC to +60æC)] Modes of Emission: F2, F3 Antenna Impedance: 50 Ohms, unbalanced Supply Voltage: 13.8 V DC ±15 %, negative ground Current Consumption: RX: less than 0.7 A, less than 0.3 A (squelched) TX: 10 A(65W)/ 7A(25W)/ 5A(10W)/4A(5W) Operating Temperature Range: -4æF to +140æF (-20æC to +60æC) Case Size(WxHxD): 6.3" x 2.0" x 7.3" (160 x 50 x185 mm) (w/o knobs) Weight: 4.0 lb (1.8 kg) Transmitter Output Power : 65 W / 25W / 10W / 5W Modulation Type: Variable Reactance Maximum Deviation: ±5 kHz / ±2.5 kHz Spurious Radiation: Better than -60 dB Microphone Impedance: 2 kOhms Receiver Circuit Type: Double Conversion Superheterodyne IFs: 21.7 MHz & 450 kHz Sensitivity (for 12 dB SINAD): Better than 0.2µV Selectivity( -6/-60 dB): 12 kHz / 28 kHz IF Rejection: Better than 70 dB Image Rejection: Better than 70 dB Maximum AF Output: 3 W into 4 Ohms @10 % THD

Expanded Frequency Options for Greater Coverage
Designed to cover the full band in the VHF and upper range of the UHF bands, get wide band coverage in one radio.

Broad Channel Capacity
Get 8 channels for easy operation with the VX-2100 Series or 128 channels for large group communications in the VX-2200 Series to get the job done.

More Scanning Options
Compared to other mobile two-way radios in its class, the VX-2100/2200 Series provides exceptional flexibility in scanning features that is designed to optimise operation for a wide variety of environments. In addition to basic scan, you also get Priority, Dual Watch, Follow-me, Follow-me Dual Watch and Talk Around scanning built-in.

When Safety Counts
The VX-2100/2200 Series comes standard with built-in Emergency alert for enhanced driver safety. A panic button can be triggered by the front panel button to alert the dispatcher when problems arise.

Easily Integrate with Existing MDC System
Add the optional VME-100 board to make VX-2100/2200 mobile radios compatible for use with the rest of your MDC-1200® fleet.

Exclusive Auto-Range Transpond System - ARTS™
Only Vertex Standard radios are designed to inform you when you and another ARTS™-equipped station are within communication range. If out of range for more than 2 minutes, your radio senses no signal has been received and beeps to alert you. The base station can then alert the field unit to move back in range. A great solution to keep your workers coordinated.

Additional Features
• Six programmable keys
• 8-Character alphanumeric display (VX-2200)
• 1-Character numeric display (VX-2100)
• RSSI signal strength indicator
• 2-Tone encode and decode
• 5-Tone signaling
• CTCSS / DCS Encode and Decode
• BCLO, BTLO, TOT
• DTMF Paging
• Stun / kill / revive (5-tone)
• Remote listen
• Lone Worker
• Programmable minimum volume button
• D-Sub 15 Pin accessory connector
• Public address / horn alert
• Radio-to-radio cloning

General Specification

Frequency Range
VHF: 134 – 174 MHz
UHF: 400 – 470 MHz

Number of Channels and Groups
128 and 8 Groups (VX-2200)
8 and 1 Groups (VX-2100)

Power Supply Voltage
13.6 V DC ± 15%

Channel Spacing
12.5 / 20 / 25 kHz

PLL Steps
VHF: 2.5 / 5 / 6.25 kHz
UHF: 5 / 6.25 kHz

Current Consumption
TX: 6 A RX: 2.5 A, Standby: 200 mA

Operating Temperature Range
–30°C to +60°C

Frequency Stability
Better than ±2.5 ppm

RF Input-Output Impedance
50 Ohms

Dimension (W x H x D)
165 x 45 x 155mm

Weight (Approx.)
1.3 kg


Receiver Specification: measured by EN 300 086

Sensitivity 20dB SINAD
-4 dB µV emf / -2 dB µV emf

Adjacent Channel Selectivity
VHF: 75 / 65 dB
UHF: 70 / 65 dB

Intermodulation
68 dB

Spurious and Image Rejection
57 dBm

Audio Output
Internal: 4 W @ 18 Ohms, 5% THD
External: 12 W @ 4 Ohms, 5% THD


Transmitter Specification: measured by EN 300 086

Output Power
25 / 12.5 / 5 / 1 W

Modulation
16K0F3E, 11K0F3E

Modulation Limiting
±5.0 kHz @ 25 kHz
±4.0 kHz @ 20 kHz
±2.5 kHz @ 12.5 kHz

Audio Distortion
< 3% @ 1kHz

Spurious Emission
-36 dBm ≤ 1 GHz, -30 dBm > 1 GHz

Hum and Noise
VHF: 50/44 dB
UHF: 48/42 dB

• MH-67A8J: Standard microphone
• MH-75A8J: Keypad microphone (16 keys)
• MD-12A8J: Desktop microphone
• MLS-100: External speaker, 12W
• MLS-200: External speaker, 12W (indoor/outdoor use)
• FP-1023A: External power supply
• LF-1: DC Line Filter

Option Boards
• FVP-25: Voice Inversion Encryption & DTMF Paging
• FVP-35: Rolling Code Encryption
• FVP-36: Voice Inversion Encryption only
• VME-100: MDC-1200®/GE-STAR® ANI Encode

Memory for Enhanced Group Communications
For group communications, get the radio that best serves your needs with 501 programmable channels in the VX-4200E Series. In addition to 501 channels, the VX-4200E keeps operations easy with Direct Channel Access. For smaller operations, consider the 8-channel VX-4100E Series option.

Prevent Unauthorised Use
If lost or stolen, the VX-4100E/4200E Series has built-in 5/6-tone features that allow for over-the-air kill and revive to prevent misuse of missing radios.

When Safety Counts
As with all Vertex Standard mobile radios, the VX-4100E/4200E Series comes standard with built-in Emergency alert for enhanced driver safety. A panic button can be triggered by the front panel button or remotely to alert the dispatcher when problems arise.

Exclusive Auto-Range Transpond System – ARTS™
Only Vertex Standard radios are designed to inform you when you and another ARTS™-equipped station are within communication range. If out of range for more than 2 minutes, your radio senses no signal has been received and beeps to alert you. The base station can then alert the field unit to move back in range. A great solution to keep your workers co-ordinated.

Additional Features
• Five programmable keys (VX-4200E)
• Three programmable keys (VX-4100E)
• 12-Character alphanumeric display (VX-4200E)
• RSSI signal strength indicator
• DTMF ANI
• CTCSS / DCS Encode and Decode
• BCLO / BTLO and TOT Functions
• MDC 1200® ANI encode
• Compander
• Internal emergency microphone (front panel)
• Priority scan
• Dual Watch scan
• Follow-me scan
• Follow-me Dual Watch scan
• Talk Around scan
• Group scan (VX-4200E)
• D-sub 15 pin accessory connector
• Public address / horn alert
• User-selectable tones (VX-4200E)
• Radio-to-radio cloning

General Specification

Frequency Range
VHF: 134 – 174 MHz
UHF: 400 – 470 MHz

Number of Channels and Groups
501 and 32 Groups (VX-4200E)
8 and 1 Groups (VX-4100E)

Power Supply Voltage
13.2 V DC ± 15%

Channel Spacing
12.5 / 20 / 25 kHz

PLL Steps
2.5 / 5 / 6.25 kHz 5 / 6.25 kHz

Current Consumption
TX: 6A (25W), RX: 2.5 A, Standby: 0.3 A

Operating Temperature Range
–30°C to +60°C

Frequency Stability
±2.5 ppm

RF Input-Output Impedance
50 Ohms

Dimension (W x H x D)
165 x 43 x 155mm

Weight (Approx.)
1.4 kg


Receiver Specification: measured by EN 300 086

Sensitivity 20 dB SINAD
- 4 dB μV emf / -2 dB μV emf

Adjacent Channel Selectivity
VHF: 85 / 70 db
UHF: 75 / 65 dB

Intermodulation
70 dB

Spurious and Image Rejection
80 dB

Audio Output
Internal: 2 W @ 32 Ohms, 5% THD
External: 12 W @ 4 Ohms, 5% THD


Transmitter Specification: measured by EN 300 086

Output Power
25 / 12.5 / 5

Modulation
16K0F3E, 11K0F3E

Modulation limiting
±2.5 / ±4.0/ ±5.0 kHz

Audio Distortion
< 3% @ 1kHz

Spurious Emission
75 dB below carrier
-36 dBm @ ≤1 GHz, -30 dBm @ > 1 GHz

• MH-67A8J: Standard microphone
• MH-53A8J: Noise cancelling microphone
• MH-75A8J: Keypad microphone (16 keys)
• MD-12A8J: Desktop microphone
• MLS-100: External speaker, square, 12W
• MLS-200: External speaker, 12W (indoor/outdoor use)
• FP-1030A: External power supply
• MMB-85: Mobile mounting bracket
• LF-1: DC Line filter

Option Boards
• FVP-25: Voice inversion encryption & DTMF paging
• FVP-35: Rolling code encryption
• FVP-36: Voice inversion encryption only
• DVS-5: Digital voice storage unit
• VME-100: MDC-1200® / GE-STAR® ANI Encode
• VMDE-200: MDC-1200® / GE-STAR® ANI Enc./Dec

Basestasion/Repeater with 16 channel capacity
220v AC  internal PSU with battery back up      
Dual-Purpose Repeater for Efficient Communications

· 16 Channels

· 10 to 50 Watts (adjustable)

· VHF: 134 – 150 MHz; 150 – 174 MHz

· UHF: 400 – 430 MHz; 450 – 480 MHz

· 8-Character ANI/ENI ID Display





The VXR-7000 not only helps expand communication range, but it also serves as a base station for convenient, easy fleet communications in public safety, industrial or administrative work areas. Continuous-duty and cycle-rated.

Convert To Talk At A Press Of A Button
Can immediately switch to function from repeater mode to base station mode simply by pressing the Push To Talk transmit button. Once released, the unit converts back to repeater mode.
Local or Remote Operating Capability
Controlled by the operator with a press of a button, the VXR-7000 is designed to function as programmed. Or, switch to remote mode and the unit is controlled by instructions received from an external device connected to the accessory connector.
When Safety Counts
Has DTMF decoding built-in to coordinate with the Emergency and ANI functions found in Vertex Standard mobile and portable two-way radios. If an Emergency alert is received from a mobile or portable radio, the VXR-7000 will beep loudly and blink the LCD to notify the dispatcher of the emergency alert.
Uninterrupted Power Supply
For uninterrupted operation during power failures, a 12-volt rechargeable battery may be connected. During a power outage, the automatic power control circuit will immediately switch the repeater to the backup battery.
Additional Features
• 47 CTCSS / 108 DCS Codes Encode and Decode

• CW ID Transmitter

• BCLO, BTLO Functions

• DTMF Encode and Decode
• Community Repeater Operation (up to 16 tones)

• Time-Out Timer, Hang Timer and Guard Timer

• D-Sub 25 Pin Accessory Connector

• Line Interface Port

Options
• Duplexer Installation Kit

• Internal VHF Duplexer 148 – 160 MHz

• Internal UHF Duplexer 440 – 470 MHz

 Basestasion/Repeater with 32 channel capacity

High Power Output For Exceptional Reach and Performance



· 32 Channels

· 50 Watts or 100 Watts

· VHF: 134 – 160 MHz; 148 – 174 MHz

· UHF: 400 – 430 MHz; 450 – 480 MHz; 480 – 512 MHz

· 6 Dual-Function Programmable Keys





Can perform in repeater or base station mode depending on the application. Includes Priority Channel scanning capability for efficient communications monitoring.

Power Supply Backup With Alert
Should DC power fail at the repeater site, the VXR-9000 will automatically revert to a backup DC power source if connected. Under backup DC power, the repeater will transmit an alert message to notify the operator that immediate attention is required at the repeater site.
Designed For High Reliability
The cooling fan diameter is 3+ inches and thermostatically controlled to ensure a stable temperature environment. Fan operation may be programmed for three options: off, continuous or temperature-controlled, depending on the application. A malfunction alarm is also included.
Flexible, Automatic Command Sequence Configuration
May be programmed to perform a five-step sequence of commands for certain operating events. For example, during a DC power failure when the repeater switches to a backup power supply, the repeater can be programmed to switch to low power and send a CW ID advising of the situation, etc.
Additional Features
• 47 CTCSS / 108 DCS Codes Encode and Decode

• CW ID Transmitter

• CW Message

• Multi-Tone Decode

• Compander Per Channel

• D-Sub 25 Pin Accessory Connector

• Automatic DC Backup Switching Alert

• EIA Rack Mount Size
Options
• Voice Inversion Encryption and DTMF Paging

• Rolling Code Encryption

• Internal VHF Duplexer 148 – 160 MHz

• Internal UHF Duplexer 440 – 470 MHz

VX-920 Series Intrinsically Safe
The VX-920/970 series is offered in intrinsically safe options that meet the SGS requirements of ANSI/UL913 6th Edition for Class I, Division I, Groups A-D, Class II, Groups E-G and Class III for use in hazardous locations.

Dependable communications for
long-term reliability
The VX-920 Series is ready to respond when you are with state-of-the-art engineering and a wide array of features, providing great value in its class.

Features Specifications Accessories Resources Withstands Harsh Environments
Rain, snow, fire suppression spray and dust are no problem for these radios manufactured to strict IP ratings. The VX-920 series meets international waterproofing standard IP57 where water does not harm the radio when submersed to a depth of 1 metre for up to 30 minutes.
Intrinsically Safe
The VX-920 Series is available in intrinsically safe options that meet the SGS requirements of ANSI/UL913 6th Edition for Class I, Division 1, Groups A-D, Class II, Groups E-G; and Class III for use in hazardous locations.
Never Miss An Important Call
Includes DTMF paging and unmatched flexibility in scanning features that are designed to optimise operation in a wide variety of environments. In addition to basic scan, you also get Priority, Dual Watch, Follow-me, Follow-me Dual Watch and Talk Around scanning with a programmable home channel function built-in.
When Safety Counts – Never Be Alone
When help is needed, the VX-920 Series has Emergency notification that will switch to a designated channel and send an emergency alert. The radios also include Remote Listen which turns the radio on remotely if needed to check out what is happening near the radio.
Loud Audio For Noisy Environments
With 700 mW audio output, be assured of hearing critical information you need.
Exclusive Auto-Range Transpond System – ARTS™
Only Vertex Standard radios are designed to inform you when you and another ARTS™-equipped station are within communication range. If out of range for more than 2 minutes, your radio senses no signal has been received and beeps to alert you. The base station can then alert the field unit to move back in range. A great solution to keep your workers co-ordinated.
Additional Features
• 512 Channel capacity (VX-929/924)
• 48 Channel capacity (VX-921)
• Wide band coverage
• Seven programmable keys (VX-929/924)
• Three programmable keys (VX-921)
• Programmable 3-position toggle key
• Direct channel recall
• 12-Character LCD (VX-929/924)
• RX/TX Battery power save
• DTMF ANI
• Stun / kill / revive (5-tone)
• Lone Worker
• 2-Tone encode and multiple 2-tone decode
• 5-Tone signaling
• MDC-1200® ANI encode
• Compander
• Whisper
• Minimum volume control
• Clear voice and audio pitch control
• 7-Colour LED call alert indicator
• User selectable tone (VX-929/924)
• Radio-to-radio cloning

General Specification

Frequency Range
VHF: 134 – 174 MHz
UHF: 400 – 470 MHz; 450 – 520 MHz

Number of Channels and Groups
512 and 32 Groups (VX-929/924)
48 and 3 Groups (VX-921)

Power Supply Voltage
7.4 V DC ± 20%

Current Consumption
TX: 1.7 A, RX: 200 mA, Standby: 75 (30) mA
TX: 1.9 A, RX: 200 mA, Standby: 75 (30) mA

Channel Spacing
12.5 / 20 / 25 kHz

PLL Steps
5 / 6.25 kHz

Battery Life (5-5-90 duty)
3000 mAh FNB-V92LIIS
VHF: 23 hrs (18 hrs w/o saver)
UHF: 21.5 hours (16.5 hrs w/o saver)


IP Rating
IP 57

Operating Temperature Range
–30° C to +60° C

Frequency Stability
±2.5 ppm

RF Input-Output Impedance
50 Ohms

Dimension (H x W x D)
133 x 57.5 x 37.5 mm (w/FNB-V86LI)

Weight (Approx.)
370 g (w/FNB-V86LI, ANT and Belt Clip)


Receiver Specification: measured by TIA/EIA-603

Sensitivity 12 dB SINAD
0.25 / 0.32 μV

Adjacent Channel Selectivity
75 / 70 dB

Intermodulation
75 / 70 dB

Spurious and Image Rejection
VHF: 80 dB
UHF: 75 dB

Audio Output
700 mW @ 16 Ohms 5% THD


Transmitter Specification: measured by TIA/EIA-603

Output Power
5 / 2.5 / 1 / 0.25 W

Modulation
16K0F3E, 11K0F3E

Conducted Spurious Emissions
70 dB

FM Hum & Noise
45 / 40 dB

Audio Distortion
< 3 % @1kHz

 
VX-920 ATEX Series

Dependable communications for long-term reliability
The VX-920 Series is ready to respond when you are. Built with a wide array of features and ATEX certified for gas protection to use in explosive hazardous settings, get the performance and value you need in a reliable radio solution.

Features Specifications Accessories Resources ATEX Approved for Gas Protection
II 2 G E Ex ib IIC T4

Withstands Harsh Environments
Water, dust, temperature extremes, shock and vibration are no problem for these radios manufactured to rugged Military Standards specifications. The VX-920 Series meets international waterproofing standard IP57 where water does not harm the radio when submersed to a depth of 1 metre for up to 30 minutes.

Never Miss An Important Call
Includes DTMF paging and unmatched flexibility in scanning features that are designed to optimise operation in a wide variety of environments. In addition to basic scan, you also get Priority, Dual Watch, Follow-me, Follow-me Dual Watch and Talk Around scanning with a programmable home channel function built-in.

When Safety Counts – Never Be Alone
When help is needed, the VX-920 Series has Emergency notification that will switch to a designated channel and send an emergency alert. The radios also include Remote Listen which turns the radio transmit on remotely if needed to check out what is happening near the radio.

Loud Audio For Noisy Environments
With 700 mW audio output, be assured of hearing critical information you need.

Exclusive Auto-Range Transpond System – ARTS™
Only Vertex Standard radios are designed to inform you when you and another ARTS™-equipped station are within communication range. If out of range for more than 2 minutes, your radio senses no signal has been received and beeps to alert you. The base station can then alert the field unit to move back in range. A great solution to keep your workers co-ordinated.

Additional Features
• 512 Channel capacity (VX-929/924)
• 48 Channel capacity (VX-921)
• Wide band coverage
• Seven programmable keys (VX-929/924)
• Three programmable keys (VX-921)
• Programmable 3-position toggle key
• Direct channel recall
• 12-Character alphanumeric display (VX-929/924)
• RX/TX Battery power save
• DTMF ANI
• CTCSS / DCS Encode and Decode
• BCLO / BTLO and TOT
• Stun / kill / revive (5-tone)
• Lone Worker
• 2-Tone encode and multiple 2-tone decode
• 5-Tone signaling
• MDC-1200® ANI encode
• Compander
• Whisper
• Minimum volume control
• Clear voice and audio pitch control
• 7-Colour LED call alert indicator
• User selectable tone (VX-929/924)
• Radio-to-radio cloning

General Specification
Frequency Range
VHF: 134 – 174 MHz
UHF: 400 – 470 MHz
Number of Channels and Groups
512 and 32 Groups (VX-929/924)
48 and 3 Groups (VX-921)
Power Supply Voltage
7.4 V DC ± 20%
Channel Spacing
12.5 / 20 / 25 kHz
PLL Steps
5 / 6.25 kHz
Battery Life (5-5-90 duty) 1500 mAh FNB-V100LIEX
VHF: 16.5 hrs (12.5 hrs w/o saver)
UHF: 16 hrs (12.2 hrs w/o saver)
IP Rating
IP 57
Operating Temperature Range
–10°C to +55°C
Frequency Stability
±2.5 ppm
RF Input-Output Impedance
50 Ohms
Dimension (H x W x D)
133 x 57.5 x 41 mm
Weight (Approx.)
400 g (w/FNB-V100LIEX, ANT and Belt Clip)

Receiver Specification: measured by EN 300 086
Sensitivity 20 dB SINAD
- 4 / -2 dB μV emf
Adjacent Channel Selectivity
75 / 65 dB
Intermodulation
65 dB
Spurious and Image Rejection
VHF: 80 dB
UHF: 75 dB
Hum and Noise
48 / 42 dB
Audio Output
700 mW @ 16 Ohms 5% THD

Transmitter Specification: measured by EN 300 086
Output Power
1 / 0.5 W
Modulation Limiting
± 5 kHz @ 25 kHz
± 4 kHz @ 20 kHz
± 2.5 kHz @ 12.5 kHz
Spurious Emissions
-36 dBm @ ≤ 1 GHz, -30 dBm @ > 1 GHz
FM Hum & Noise
45 / 40 dB
Audio Distortion
< 3 % @1kHz

Accessories - ATEX Approved
• MH-50D7A: Public Safety speaker mic w/toggle
• MH-66A7A: Submersible noise cancelling speaker mic
• MH-66B7A: Submersible speaker mic w/PF key & toggle
• FNB-V100LIEX: 1500 mAh Li-Ion battery
Accessories - ATEX Exempt
• VAC-6921EX: 6-Unit multi charger
• CD-37EX: Desktop charger
• PA-42: AC Adapter for desktop charger
• DCM-1: Mounting adapter for desktop charger
• VCM-2: Vehicular charger kit

Downloads
VX-920 ATEX Series
Spec Sheet [2.4MB]

Worldwide Marine Division Amateur Radio

Sitemap | Legal | Terms and Conditions

VERTEX STANDARD is registered in the US Patent & Trademark Office.
All other product or service names are the property of their respective owners.
© Vertex Standard Co. Ltd. 2009

• High Contrast 6" Silver Bright LCD
• 13 range scales from 0.125 to 16 nm
• Optional GPS/DGPS/WAAS navigator shows waypoint position with "lollipop mark"
• Low power consumption 8 Watts in Watchman mode
• Reverse video feature for effective use at night
• Improved short range target detection by using narrower pulselengths and dual IF bandwidths
• Zoom window for close observation of a specific area
• Guard Zone Alarm (US Patent No.5032842)

LS-4100 LCD 5' B/W 300W

Characteristics
High-contrast monochrome LCD (240 x 320 pixels)
Dual Frequency 50/200 kHz, 300 W rms
"White Line" and "Sea-Through" technology discriminates echoes from the seabed or anywhere in the water column
Wind direction and speed display with appropriate sensor.
"Mini-navigator" feature provides 12 "Go To" waypoints with programmable names and registers in VideoPlotter at the same time by marking waypoints.
Unique Bottom-Lock Fish Alarm provides consistent audible bottom fish detection in varying depths
Specifications
DISPLAY 5" MONO LCD
SINGLE/DUAL DUAL
FREQUENCY 50/200 kHz
POWER 300 W
POWER SUPPLY 12 VDC

Adding a New Dimension to 3D

NavNet 3D is a groundbreaking navigation system that introduces new concepts for a user interface that makes navigating your vessel easier than ever before

NavNet 3D redefines the user interface of onboard navigation system
New cutting-edge technology "TimeZero"
True 3D environment for a more instinctive chart presentation
High-resolution satellite photography can be fused with raster or vector chart information
New Ultra High Definition (UHD) Digital Radar
FURUNO Digital Filter (FDF) Fish Finder
"RotoKey" puts a whole new spin on user friendly

Characteristics
Stylish design to complement the appearance of recreational boats
All-in-one system for simple, space-saving installation
Heading accuracy of 1.0°rms
Short start-up time of 3 minutes
Excellent follow-up rate of 45°/s exceeds requirements for high speed craft
Free from regular maintenance
NMEA2000 interface standard

Specifications
ATTITUDE 0.5°RMS
FOLLOW-UP 45°/s rate-of-turn
POWER SUPPLY 12 - 24 VDC